About Us
1. What is the t_sensor interface on the ASUS Z790 motherboard?
The _SENSOR interface on the ASUS Z790 motherboard is used to expand the interface of a regular temperature probe.. In the ROG MAXIMUS Z790 DARK HERO and ROG MAXIMUS Z790 HERO, both ASUS Z790 motherboards are equipped with interface groups specifically designed for split water cooling, and the _SENSOR interface is one of them. The other 4-pin fan ports on the motherboard can only output 1A current, while the W-PUMP+interface dedicated to the water pump can output 3A current to drive the water pump, and this interface defaults to full speed, while other interfaces default to Q-FAN intelligent control. The W-FLOW port next to it is used to connect the flowmeter, the W-OUT and W-IN interfaces are used to connect the water temperature probe, and the T-SENSOR interface is responsible for expanding the function of ordinary temperature probes to meet users needs for temperature monitoring at different locations, helping users better grasp the temperature situation of computer hardware and ensure the stable operation of the computer.
2. Sensor Chinese English Translation
Sensor Chinese English translation is as follows: Air flow sensor: airflow sensor, vane air flow sensor: vane air flow sensor, vortex air flow sensor, hot film air flow sensor, volume of core air flow sensor, inlet air pressure sensor: intake pressure sensor, atmospheric pressure sensor, brake master cylinder oil pressure sensor, pressure sensor with pressure sensor, crankshaft position sensor, throttle position sensor.
Sensor: throttle position sensor, photoelectric sensors, car high: car mounted high position photoelectric sensor, corner sensors: car angle sensor Liquid level sensors: Overflow ring sensors: Position sensors for overflow rings Thermistor temperature sensors: Thermistor temperature sensors: Paraffin gas temperature sensors: Paraffin gas temperature sensors Thermistor hypoxic body temperature sensors: Thermistor low oxygen body temperature sensors Engine speed sensors, speed sensors, wheel speed sensors: Engine speed sensors Knock sensors: Knock sensors Oxygen sensors: Oxygen sensors Smoke sensors: Smoke concentration sensors Humidity sensors: Humidity sensors Sunshine intensity sensors Photovoltaic light sensors: Light intensity sensors Current detection sensors: Current detection sensors Rain sensors: Rain sensors Friction brake shoe wear sensor chip: Brake pad wear sensor chip NOx sensors: Nitrogen oxide sensors Auto navigation sensors: Navigation sensors3. What are the sensors and switch signals in the engine electronic control system? Could you please tell me?
The commonly used sensors and switch signals for engine fuel injection systems are:
(1) Air Flow Sensor (AFS) or Manifold Absolute Pressure Sensor (MAP), which detect the intake air flow signal.
.(2) The crankshaft position sensor CPS (Crankshaft Position Sensor) detects signals of crankshaft angle (or engine speed) and piston position (top dead center), so it is also known as a crankshaft angle sensor.
(3) The Throttle Position Sensor (TPS) detects the throttle opening and acceleration signal. Such as fully open, fully closed, and partially open throttle valves; By using a microcomputer to perform dual differential processing on the throttle opening signal, acceleration and deceleration signals can be obtained.
(4) The detonation sensor (DS) detects whether t
Product List
Contact Us
News Dynamic
Related AD
